Thursday, October 31, 2013

KITT Goes In For Bodywork!

Last night Troy stopped by with the car carrier so we could take KITT over to Mario's shop. Mario plans to do all the bodywork on KITT now and then we will paint him this spring. 

I got all of the stuff emptied out of KITT and had him ready to go, along with the driver side fender and the rear spoiler, both of which still needed some work. 


Tuesday, October 22, 2013

Insulating The Garage, Part 5

As we were coming in for the night, Sara commented that the people who read our blog are probably thinking "What is with all of these garage updates and what does it have to do with Project: K.I.T.T.?"

The truth is, it has everything to do with KITT! If it wasn't for Project: K.I.T.T. we would not have insulated the garage. Period. I did not want to spend another winter freezing in the garage just so I could get some time in with KITT. Besides, everyone knows KITT hates winter, cold temperature extremes and most of all, snow.

I vacuumed and taped the other half of the east wall and one fourth of the south wall, and vacuumed the shelves after work today. Once Sara got home we tackled the bench and tools.


Monday, October 21, 2013

Insulating The Garage, Part 4

I vacuumed and taped one half of the east wall, and vacuumed the shelves and KITT's driver and passenger seats after work today. Then when Sara got home we put everything back after thoroughly cleaning it all off. We now have the north stall of the garage about 80% cleaned and back to normal.


Saturday, October 19, 2013

Insulating The Garage, Part 3

We finished insulating the garage earlier this week and everyday after work I have been spending a couple hours cleaning up the mess. Mess is an understatement! The sheetrock powder and the dust from the cellulose insulation is EVERYWHERE. It does not matter how well we covered stuff up, in the end it was futile.

We have been following the recommended method for sheetrock powder cleanup and have been working in sections vacuuming everything including the ceiling, walls and floor. This way there is no dust kicked back up in the air (thanks to the HEPA filter). We will have to do this for the entire garage.

Today we finished cleaning the north wall and we taped off the seams I had cut to drop in the insulation. 


Saturday, October 12, 2013

Insulating The Garage, Part 2

Although we have not been working on KITT, we have been making progress insulating the garage. It is very messy and time consuming, but it will be so worth it in the end. With the garage insulated we will be able to get a lot more time in with KITT this winter. :)


Tuesday, October 1, 2013

KITT's New T-Top Hardware... Or Not

The guy I bought the t-tops from said that he mailed the mounting hardware in a separate envelope so that it would not accidentally scratch the t-tops. The envelope arrived today.

Fuzzie was anxious to find out what was inside.


Monday, September 30, 2013

KITT's New T-Tops

After a fun-filled weekend trip to celebrate my brother-in-law's 30th birthday, I could not wait to open these up! They were packaged very well and arrived without incident. The t-tops themselves are in great shape with all of the inside plastic trim intact and uncracked. The insides are mirrored just like the originals I had, but there is not a scratch to be found. There are some scratches on the outside of the glass, but that is to be expected with anything 23-years-old. I think most of them can be polished out, and I plan to have a local glass shop go over them for me once I have them disassembled for reconditioning and painting.


Sunday, September 22, 2013

Insulating The Garage, Part 1

Today Sara and I are insulating the ceiling of the garage. It will be so much nicer to work in a warm garage this winter. :) 


Friday, September 20, 2013

Installing The Steering Column

Today after work I finished painting the middle portion of the steering column. I realize that none of this was really functionally necessary, but it sure looks a lot better.


Wednesday, September 18, 2013

KITT's Cousin

I had to take my '88 Oldsmobile daily driver to Troy's shop because the fuel lines had rotted away and pin holes had developed in the return line. Troy thought this would be a fairly straight forward replacement, but it turns out the fittings on the fuel lines for that car are not available from the local auto parts stores. Troy was going to have to rescue some from the salvage yard. 

Needless to say, I am without wheels for at least a couple days. Troy graciously lent me his '83 Camaro to drive in the meantime. It's not quite like the Olds, but I think I can manage. ;)

While I had it, I decided to take a couple pictures with KITT in the background. It is neat to see the two cars together. They are cousins, after all. :)


New T-Tops On Their Way

I have been searching for replacement plastics for KITT's t-tops. This is the plastic trim on the interior of the t-top that runs between the A and B pillars. Mine was cracked and there are no reproduction pieces to be found.

I came across a guy on Thirdgen.org parting out a '90 Trans Am and he had the t-tops listed for sale. The plastics looked great and so did the glass so I inquired about the condition of both just to be sure. It turns out they are in great condition and as an added bonus because they are from a '90, they are the locking pin style latches and not the '82-'83 hook style latches. GM revised the latches starting in '84 because they held and therefore sealed better. I asked if he had the mounting hardware (car side) for the pin style and he said he would sell them with the t-tops if I wanted them. With the hardware I will be able to easily convert KITT from the hook style to the newer pin style. 

I said I would take them, sent payment and he shipped them out this morning! Pictures to follow when they arrive. :)

As a side note: I found out through a lot of researching that most if not all the factory glass t-tops are mirrored on the inside. This was something I really was disappointed in when I first got the car. At night the mirroring makes it very hard to see out of the t-tops unless you are under a very bright light source. I was worried about the reflection of KITT's dash, but since it is highly unlikely that I will find a non-mirrored set I have decided to put up with them (the '90 set that is on its way is also mirrored).

Monday, September 16, 2013

300th Post!

Wow! Can you believe it is our 300th post? Project: K.I.T.T. has been going strong now for 2 years and 22 days. (Read my first post.) Now to be fair, we have only had the Trans Am for 1 year, 8 months and 2 days. We still have made a tremendous amount of progress in that time!

I have spent some time here and there over the last few days doing some cleaning and reorganizing in the garage. (Yes, I know we do that a lot. What can I say? We like things organized.) 

I went through the garage and got rid of a lot of the parts that we no longer need, either because we have already replaced them or they are not going back on the car. Here is what I got rid of (and what I kept):

I got rid of the power antenna assembly. It was non-functional and KITT will not have an external antenna.


Friday, September 13, 2013

KITT's Nose Video Overview

Here is a video overview of KITT's new season three front bumper. I also had a chance to talk with Billy from Knight Designs and I learned a couple of interesting things about the third season nose that I was not aware of. I highlight both of these in the video. The video gets a little shaky towards the end, but really gives you a good look at KITT's new nose.

Tuesday, September 10, 2013

On His Wheels!

Sunday morning we had one goal: Get KITT back on his wheels.

We started with the driver side.


Monday, September 9, 2013

KITT's Scanner Bar

KITT's scanner bar arrived today! I decided to wait until I got home to open it because I knew my rabbit Fuzzie would be angry if I opened it without her (you have no idea the wrath of an angry bunny).

As soon as I got home I opened the box. Joe Huth packs his scanner bars with enough packing peanuts and bubble wrap to ensure that it arrives safe and sound. 


KITT's Scanner Bar (Sneak Peek)


Sunday, September 8, 2013

Ruby's Cowl: The Conclusion

I know this blog is supposed to be about KITT, but since I posted about ordering my new cowl piece, I wanted to do one more post about installing it.

Saturday morning we washed the Freestyle and my mom's car. My mom thought my name decal on my Freestyle was really neat, so I put one on her car, too. Her car's name is Jade.


Thursday, September 5, 2013

KITT's Scanner

Yesterday I ordered a screen accurate scanner bar from Joe Huth. He had the bar duplicated from a bar that was actually used on-screen in the Knight Rider TV show. This scanner is as accurate as it gets! 


Wednesday, September 4, 2013

KITT's Nose And Stone Guards Are Here!

A large package from Knight Designs arrived today!


"Why Are You Standing On The Car Like That?"

Jonathan and Troy decided the car did not have enough weight without the engine, so they had me stand on the K-Member while they installed the front springs and struts. The K-Member is about the same width as a balance beam, if you think about it. :)

The worst part about standing on the K-Member was the fly strip that Jonathan had hung in the garage. Its position kept me from standing up straight.