Our plan Saturday was to POR-Strip the entire interior of the car. We started on the front floor pans just below the firewall. We followed the same procedure we used for the firewall Friday, although the results were not nearly as good. It required much more scraping and scrubbing, and left a lot of paint behind. When it came time to rinse, we ran into an issue with the wind and rain outside. Since we could not roll the car outside, we did our best to rinse the front section off in the garage, and decided to work on something else until the wind and rain ceased.
We started by sanding all the remaining well-painted areas in an effort to rough them up for adhesion. Sara used a sanding block for this. I used the mouse sander on a few spots in the truck area, but it seemed to gouge the metal unnecessarily.
Sara sanding