Happy Valentine's Day From Project: K.I.T.T.

Celebrating 200 Followers On Google+

Project: K.I.T.T.'s Google+ page just hit 200 followers today! Thanks to everyone for your continued interest and support!

If you have not had a chance to check out the Project: K.I.T.T. page on Google+ you really should. It's a great way to stay updated, leave comments, or even ask questions about the Project. It will even notify you of new blog posts and videos.

More Parts For KITT

Mark Scrivani of Mark's Custom Kits Inc. has changed his focus and is no longer going to be in the Knight Rider replica business. As a result, the large collection of Trans Am restoration parts he has amassed over the years is up for sale.

I ordered the following from Mark: Tan rear passenger roof trim, a lower dash trim panel without cutouts, a headlight switch, a New Old Stock (NOS) Glove box cover, and a new turn-signal, cruise stem, with wiper delay. The parts arrived on Monday.

Project: K.I.T.T - What's Been Going On

I dug out KITT's schematics from where they have been packed since we insulated the garage and hung them back on the garage wall. You know what that means... It is time for Project: K.I.T.T. to get serious again. No more anger, no more moping, and no more excuses.

Damage Assessment

Since today was the warmest day in quite a while, Sara and I checked out the extent of the overspraying damage.

Two Year Anniversary

I got KITT two years ago today. Here is what he looked like on January 14, 2012...

OMG, WTF!

Just as I finished the door hinge bolts and was putting stuff away I noticed what I thought was a paint run on the driver's side rocker panel.

Getting Started Again Working On KITT

Today after work I was determined to get back to KITT. The next thing I want to do is get the doors, fenders, and hood back on the car. With those back on the car it will allow us to clean up and reorganize the garage. Frankly it has been a pain trying to work around these parts. We also have an indoor storage now, so we are going to move some of the parts from the garage into that. We love organizing, if you have not figured it out by now. ;)

I started by cleaning up the hinge bolts for the doors. They needed to be wire brushed to remove some mild surface rust. You can see that I left all of the door hinge bolts turned into their respective spots (I had already removed one before taking this picture).

KITT Is Back From The Body Shop!

This evening Troy and I went out to Mario's shop to trailer KITT home. I have been attempting to do this since the week before Christmas, but both Sara and I got really sick and the weather got really, really cold. Monday it was -27 degrees with the wind chill making it -52 degrees, just for example.

Troy picked me up about 5:45PM.

Getting Anxious

I am anxious to get back to work on KITT!  He has been waiting at the body shop for me to pick him up and trailer him home.  It has been so dang cold and snowy here lately that I have not been able to.  Soon though...

Merry Christmas 2013

KITT's Scanner Bar Update

The 55 Watt halogen bulbs arrived last week, but I have been fighting off a nasty cough/virus and have not been working on the project much. Today I decided to see if I could get the hardware I need to mount the bulbs in the scanner bar.

Celebrating 100 Followers On Google+

Project: K.I.T.T.'s Google+ page just hit 100 followers today! Thanks to everyone for your continued interest and support!

If you have not had a chance to check out the Project: K.I.T.T. page on Google+ you really should. It's a great way to stay updated, leave comments, or even ask questions about the project. It will even notify you of new blog posts and videos.

KITT's Scanner Controller Is Finished!

Brenon, of Letric Enterprises, finished my scanner controller and it arrived on Monday. 

Bodywork Update 2

Last Tuesday Dad and I stopped by Mario's shop to see how he was progressing with KITT. He had both rear quarter panels down to bare metal and had not found any unexpected surprises.

Small Box Of Parts For KITT

Back in August I received a package of parts I ordered from Shawn (OhioKARR on the Foundation board). One item in that package was the vent for the dash. Shawn had sent the center vents though and I needed the driver side vent. I was also missing the hardware for the fan shroud he sent me. I contacted him and he said he would make sure to find the correct vent and hardware and get them sent out to me. 

It took him a few months, but he came through and even contacted me to see if I needed anything else before he shipped them out. It just so happened that I did. I need the mounting brackets for the later pin style t-tops I had just acquired. I have yet to hear anything back from the guy who sold me the t-tops. :( Luckily, Shawn said he had some and would throw them in. :) The package arrived yesterday.

KITT's Scanner Controller Build Update

As promised, Brenon Fulbright of Lectric Enterprises emailed me some behind-the-scenes pictures of my controller as he is building it. He will continue to update me on the progress, so watch for more pictures soon. I am really anxious to see the finished product.

Jonathan here is a shot of some boards being populated...

Thanks

Brenon

Bodywork Update

Friday night Mario sent me a message that he was going to be working on KITT, so I stopped over to take a few pictures. I took the cowl screen and plastic mounting gaskets for the side view mirrors with me so Mario can paint them.

Mario had removed the bolts securing the rear hatch glass and asked me if I would help him lift it off. We set it to the side so that he can remove the trim.

KITT Goes In For Bodywork!

Last night Troy stopped by with the car carrier so we could take KITT over to Mario's shop. Mario plans to do all the bodywork on KITT now and then we will paint him this spring. 

I got all of the stuff emptied out of KITT and had him ready to go, along with the driver side fender and the rear spoiler, both of which still needed some work. 

Insulating The Garage, Part 5

As we were coming in for the night, Sara commented that the people who read our blog are probably thinking "What is with all of these garage updates and what does it have to do with Project: K.I.T.T.?"

The truth is, it has everything to do with KITT! If it wasn't for Project: K.I.T.T. we would not have insulated the garage. Period. I did not want to spend another winter freezing in the garage just so I could get some time in with KITT. Besides, everyone knows KITT hates winter, cold temperature extremes and most of all, snow.

I vacuumed and taped the other half of the east wall and one fourth of the south wall, and vacuumed the shelves after work today. Once Sara got home we tackled the bench and tools.