Prepping For POR-15, Part 2

posted Aug 4, 2012, 9:31 PM by Jonathan Imberi
Sara and I worked on removing the seam sealer from the lower firewall tonight.

Driver side with seam sealer intact:


Passenger side with seam sealer intact:


Driver side with seam sealer removed:


Passenger side with seam sealer removed:


Sara has become quite proficient at removing seam sealer. After scraping the area with putty knives, she vacuumed up the pieces and went over everything with her parts brush. Then she vacuumed the area again.

We had previously prepped the lower firewall area when we painted the floor pans with POR-15. We had intended to start painting this area with POR-15 tonight, but it was 8:30PM once Sara finished vacuuming. We decided to wait until tomorrow and worked some more on the engine bay instead.