Today I cleaned the engine bay, underbody and exterior of KITT. I decided to try vacuuming some of the dust off before using the Marine Clean and water process I described in my post yesterday.
You can see where I used the vacuum on the cross member. It did remove most of the dust.
I started with the Marine Clean process with the front windshield and cowl.
After that I moved on to the engine bay (both inside and underneath).
Then I cleaned the underbody and the rest of the outside of the car.
Cleaning the car took almost all day. It was very dirty.
Here is a video that shows all of the areas of KITT that have been painted with POR-15. The video was taken while rolling on a creeper so it is a little shaky.