KITT's Scanner Controller Is Finished!

posted Dec 5, 2013, 8:01 PM by Jonathan Imberi
Brenon, of Letric Enterprises, finished my scanner controller and it arrived on Monday. 

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4458.jpg

Everything was packed securely and arrived in great shape.

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4461.jpg

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4467.jpg

Here is the custom wire harness I asked Brenon to make for me. It is labeled and ready to be hooked up.

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4464.jpg

Here is the remote control for the controller. It is a standard key fob size.

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4469.jpg

Here is the controler from the top...

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4471.jpg

left side

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4473.jpg

bottom

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4476.jpg

right side

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4480.jpg

back

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4486.jpg

and front.

https://sites.google.com/a/pac-attack.com/www/project-k-i-t-t/_draft_post/IMAG4488.jpg

One of the first things I noticed was that there were no labels on the front of the controller. I contacted Brenon about this and he told me that his website had not been updated yet, but that I have the newest and latest model and he has not made a front panel label yet.

Sara surprised me and ordered the 8 halogen bulbs I will need to light the scanner. They should be arriving later this month. Thanks Sara!