With the extreme temperatures we have had lately we have not worked on KITT as much as I would have liked. Tonight there was a major cool down following a brief storm and we were able to get back to work on KITT again.
I want to continue work on putting POR-15 on the firewall and the rest of the interior spots that we did not get to the first time. I started tonight by removing the brake and accelerator pedals.
I pushed the brake pedal wiring and the speedometer cable through the firewall and into the engine bay.
I pulled the accelerator bracket, which is attached to the shift cable, back away from the firewall.
I pushed the grommet and the wiring for the heating and ventilation controls through the firewall and into the engine bay.
I noticed before I removed the air inlet assembly that one of the tabs on the top was broke and bent over. I am not sure what purpose this serves, but I am sure it can be glued.
On to the wiring for the power antenna. I pushed the grommet wiring and antenna cable through the inner wall and into the fender.